The 2-Way Acid Airless Foamer is a 1.3 GPM @ 40 PSI foam applicator for applying 2 highly corrosive chemicals, such as those used to remove concrete and for aluminum brightening, without compressed air. This acid-resistant venturi injection system uses standard city water pressure (35 – 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution. The solution then flows through the discharge hose to the “airless” foam wand which draws in atmospheric air to create and project wet, clinging foam on to any surface. Use the chemical ball valves to inject the 2 chemicals separately or simultaneously.

Key Features

No compressed air required

Flow rate of 1.3 GPM @ 40 PSI

Achieves strong concentrations up to 4:1

Weaker dilution ratios controlled by precision metering tips

Designed to apply 2 separate chemicals or 2 different concentrations of the same chemical

Chemicals can be applied separately or simultaneously by adjusting the ball valves

Projects wet clinging foam which increases chemical contact time and effectiveness

Foaming expands the chemical and reduces over-application by providing visual assurance of coverage

Use it where 35 – 125 PSI water is available

Corrosion resistant components ensure durability and years of reliable service