BSX900 Compact Walk-Through Boot Scrubber Unit w/ Dual Sole Brushes
The BSX900 is a wet, compact walk-through, sole-only, dual boot scrubber built to accommodate 1 user at a time with the ability to put through 15-25 users per minute. The user activates the system by stepping onto the platform. Diluted cleaning solution is sprayed onto rotating brushes and transferred onto the boots from a stainless steel venturi dilution valve and metering tip to provide the desired PPM. We recommend using Alpet® No-Rinse Quat Sanitizer with the BSX900 to aid in the cleaning of footwear prior to sanitizing (sanitization can only occur on pre-cleaned footwear). The BSX900 uses two rotating horizontal sole brushes, has a small footprint, and is ideal for tight spaces and medium traffic applications.
High Capacity
2 Horizontally oriented brushes clean the soles of boots
Brushes rotate in opposing directions, removing debris from the boot and directing it into the tub
Features
Dimensions: 63” x 45” x 54” (L x W x H)
Compact design for 1 user at a time (15-25 users per minute)
Solid member stainless steel construction with hinged access grate
Two removable anti-slip steps
Bi-directional entry / exit with central emergency stop
Wash-down rate stainless electrical enclosure, motors, and hardware
Spray nozzles directed down to prevent over-spray, coating brush prior to boot contact
Open grate design ensures optimal debris management
Proximity sensor and spring loaded grate for unit activation with adjustable timer
Self-draining tub with 2.5” tri-clamp fitting and four adjustable dairy approved feet
Solenoid activated brush spray system and venturi injector with 1.5 gpm flow rate
Optional side shields available for additional splash or overspray prevention
Connection Requirements
Electrical options:
115VAC, single phase, 60Hz, 19.1A
230VAC, single phase, 60Hz, 13.7A
480VAC, triple phase, 60Hz, 3.9A
3/8” Nptf cold water connection, 50psi recommended