The Acid Combo LC/A-25 Foamer is a foam applicator that works with or without compressed air to project highly corrosive chemicals such as those used to remove concrete and for aluminum brightening. This acid-resistant venturi injection system uses city water pressure (40 – 125 PSI) to draw and blend a high concentration of acid into the water stream to create a strong solution using precision metering tips. When operating with compressed air, rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose, extended wand and fan nozzle at distances up to 12 feet. When operating without compressed air, the solution flows through the hose to the “airless” foam wand which draws in atmospheric air to create and project wet, clinging foam at distances up to 6 feet.

Key Features

Achieves strong concentrations up to 3.5 to 1

Weaker dilution ratios controlled by precision metering tips

Dual-function design foams with or without compressed air

With compressed air it projects rich, clinging foam in a fan pattern at distances up to 12′

Without compressed air it projects wet, clinging foam up to 6′ using a unique, “airless” foam wand

Foaming increases chemical contact time and effectiveness and also reduces over-application by providing visual assurance of coverage

A concealed air regulator discourages unauthorized tampering with the foam consistency (wet/dry)

Corrosion resistant wetted components ensure durability and years of reliable service